|
| SmartSwitch™ Slow Motion Switch Machines (DCC optional)
| |
| We are pleased to be appointed the first North American dealer for this innovative switch control product.
|
| |
|
We proudly present a multipurpose SmartSwitch™. With its adjustable servo speed and
adjustable servo position, SmartSwitch™ offers you the ultimate flexibility to operate not
only the turnouts but also crossing gates, semaphore signals or any creative animation that you can think of.
The SmartSwitch™ gives you nine servo speeds to choose from. If you set a servo speed to the fastest, it acts as a snap action switch machine. You can also set the servo speed to the slowest to watch your turnout switch at a snail's pace. In addition, there are screw terminals for the installation of the indication lights. With addition of the SmartFrog™, you can achieve short circuit free power routing. Want to use a DCC controller to throw a turnout? Simply add the stationary decoder to the SmartSwitch™. One SmartSwitch™ stationary decoder can control up to four turnouts.
Dont take our word for it. Read a review on the Model Railroader website
|
| |
Product Features
- Easy to install.
- Built-in drilling template.
- Virtual centre line for easy trouble free mounting.
- Minimal structural interference---the servo and its mounting linkage are compact in
size.
- More mounting possibilities---traditional, off-center or horizontal rotary installation. The
servo can be installed either below the road bed or next to the turnout.
- Adjustable servo speed and position through the programming features in the
SmartSwitch™ control board to give you ultimate control for pressing the point
rails against the stock rails.
- Each control board can control up to four turnouts.
- Can use the toggle switch and the push button to trigger servo movement.
- Can simultaneously control one or up to four servos by using one toggle switch
or push button.
- Remembers the turnout positions when power is off.
- Provides various settings for indication and signal light.
- Low current draw. 9V minimum requirement for input power supply.
- DCC friendly--- SmartSwitch™ stationary decoder supports a full range of DCC
accessory addresses (1-2048) and offers simple mainline address programming.
- The decoder also supports route control features from major DCC manufacturers.
- The SmartFrog™ has easy DCC friendly power route wiring. The precise polarity
switch when both the point rails are not in contact with the stock rails allows for
zero chance of short circuit.
- The SmartSwitch™ gives you the ultimate flexibility.
|
| Product options and pricing |
Canadian Dollar price |
U.S. Dollar price |
 |
A01 Basic Smart Switch Set
(Enough for four turnouts)
Parts List
In stock, shipping now
|
$85.99 |
$79.99 |
 |
A02 Smart Switch Set with power routing frogs
(Enough for four turnouts)
Same as A01 with the addition of polarity control for switch frogs to eliminate short circuits
Parts List
In stock, shipping now |
$119.99 |
$111.49 |
 |
A03 Smart Switch DCC Set
(Enough for four turnouts)
Same as A01 with the addition of DCC control of the turnout machines
Parts List
In stock, shipping now |
$99.99 |
$92.99 |
 |
A04 Smart Switch DCC Set with power routing frogs
(Enough for four turnouts)
Same as A01 with the addition of both DCC control of turnout motors and polarity control for switch frogs to eliminate short circuits
Parts List
In stock, shipping now |
$149.99 |
$139.49 |
| Accessories
|
 |
AP01 Smart Switch Control Board
In stock, shipping now
|
$45.99 |
$42.75 |
 |
AP02 Smart Switch Servo Package
(Enough for one turnout. Requires AP01 Control Board)
| $15.99 |
$14.89 |
 |
AP03 Smart Frog Power routing package
(Enough for one turnout.)
In stock, shipping now |
$15.99 |
$14.89 |
 |
AP04 Smart Switch DCC stationary decoder
In stock, shipping now |
$20.99 |
$19.49 |
Terms and Conditions of Sale
- Prices are quoted in Canadian Dollars and U.S.Dollars. You can pay in either currency.
- Other currencies quoted upon request. Note $1 Canadian = (approximately) $0.93 US, 0.56 Sterling or 0.65 Euro. I will invoice you in your choice of US dollars, Canadian Dollars, Euros or Pounds, using exchange rates in effect on the date of the transaction.
- Canadian residents must add 5% GST to order (13% HST in HST provinces). British Columbia residents must also add 7% Provincial Sales Tax.
- International transactions including sales to USA are not charged Canadian sales taxes but may incur local import or sales taxes or duties, which are the responsibility of the purchaser
- We accept personal cheques/checks or money orders payable in Canadian or US funds. Exchange rates are calculated at the official Bank of Canada rate prevailing on the date of the transaction. We will do the conversion from US or other currencies for you: just ask. Cheques/checks and Money
Orders should be made payable to "John M. Day".
- Cash can be sent by registered mail at your risk. We accept Canadian and US dollars, UK Pounds and Euros. Do not send coin. Round up to the nearest denomination of 'folding money'. Check with us first.
- Credit cards accepted through PayPal. Ask us how if you're not already a PayPal user!
- Returned items require prior approval and are subject to a 20% restocking fee, plus shipping charges (both ways).
For further information or orders:
John Day
China Model Railway Sales
phone 604-222-8411 (M-F daytime, Pacific Time [GMT+8 hrs])
fax (604) 632-3711
Mail to:
China Model Railway Sales
c/o John M. Day
P.O. Box 45501 RPO Westside
Vancouver BC V6S 2N5
Canada
No in-person sales please!
Last modified August 6, 2009 to update for exchange rates and add reference to review in Model Railroader
email:
You are visitor number