hatch is included in the price of the hulls

Note: all pricing is in U.S. currency

Lightning Cat

27.75" X 12.50"
DESIGNED FOR 3.5 INBOARDS 
The only choice for 3.5 offshore

APBA and NAMBA Offshore Cat

Nitro Cat

36" X 14" 
DESIGNED FOR 11cc TO 13cc NITRO ENGINES 
The smoothest turning cat available

Smooth Cornering APBA and NAMBA Offshore Record Holder

King Cat I & II

44" X 17" 
DESIGNED FOR ZENOAH & 15cc NITRO ENGINES

What can be said? This put the Cat in Catamaran! This hull will handle slightly rougher waters. Both the King l & ll like high powered gas and glow engines. Both are reliable and smooth in the corners.

Blast Cat 40

40" X 16" 
DESIGNED FOR THE NEW HIGH POWERED ZENOAH AND QD25 GAS ENGINES

This hull is one of the first of it's kind with a venture design in the sponsons. The hull makes for one of the best sport boats available. It also makes for an awesome race hull if your engine is one of the very high powered gas engines of today.

Flash Cat 40

40" X 16"
DESIGNED FOR ZENOAH & 15cc NITRO ENGINES

This hull is extremely stable in rough water and can handle all the power that you can bolt into it. It's not to be confused with it's cousin the Blast Cat. This boat is faster in the straights but will not handle the corners like Blast Cat can.

R-42

42.5" X 16"
DESIGNED FOR ZENOAH GAS ENGINES

For all out speed, it's hard to beat the  R-42.

Note: all pricing is in U.S. currency

Pro 40 II

37.5" X 18"
DESIGNED FOR 7.5 INBOARDS 
 

Note: all pricing is in U.S. currency

Wave Slave O/B

37" X 10" 
DESIGNED FOR 3.5 OUTBOARDS 
NO. 1 Sport Outboard

If you are just getting into the hobby or just want a low maintenance model boat, the Wave Slave Outboard is for you. Unlike tunnel hulls where the water conditions have to be glass calm, the Wave Slave Outboard is right at home in rough to windy conditions so you can enjoy the hobby instead of waiting for calm water.

Comp 30

30" X 7.5" 
DESIGNED FOR 3.5 INBOARDS 
Three time National Champion

A wild and crazy little hot rod hull. Super fast even at high elevation and on super hot days using stock engines

Wave Slave

37" X 10" 
DESIGNED FOR 3.7 INBOARDS 
Great sport boat with 7.5

This hull is a winner in every way. With its superb styling, excellent speed and handling, the Wave Slave is a great choice. If you are a sport boater, this hull runs great with anything from a 3.5 to a 7.5 inboard.

Magnum 30

30" X 8.75" 
DESIGNED FOR 3.7 INBOARDS 
Great all around performance !!

Great style, performance and handling. The Magnum 21 is great for sport running and super fast on the race course.

Magnum 45

37.75" X 11.50"
DESIGNED FOR 7.5 INBOARDS
Runs well with 11cc I/B and a must for a first inboard

An incredibly fast and  stable hull using the 7.5 to 11cc nitro engines.

Magnum 67

43" X 11.75"
DESIGNED FOR 11cc TO 15cc INBOARDS
Runs super with 22.5 Zenoah. Available with conventional or bubble hatch

An excellent running hull with any engine from an 11cc to a water cooled Zenoah.

Wild Thing

43" X 12.50" 
DESIGNED FOR 22.5 ZENOAH & 25 TO 30 HOMELITE GAS 
Runs well with 11cc to 15cc nitro engines

This hull is based on the design of the Magnum 67 with added freeboard to accommodate the gas engines. It has excellent performance with awesome aerodynamics.

Vision

50" X 12.75" 
DESIGNED FOR 25 TO 30cc WATER COOLED HOMELITE ENGINES

Do you want to go fast? Using the 25cc or 30cc water cooled Homelite

engine, this hull is an excellent choice

Spector

50" X 12.75" 
DESIGNED FOR WATER OR AIR COOLED HOMLITES

The Spector is the same hull design as the Vision with additional freeboard to accept your air or water cooled Homelite.

Lazer 40

40" X 11 1/2"  Deep Vee
DESIGNED FOR 7.5cc,11cc,13cc 
and GAS ENGINES 

The Lazer 40 is a high performance hull that runs excellent in all water conditions. The Lazer can accommodate a multitude of engines and hardware combinations, and is easy to set up. With its sleek lines, outstanding performance and quality construction ,the Lazer 40 is a must for the all out racer. As for the sport boater the Lazer 40 is the one for you! Using lower priced stock  K&B 7.5  Nitro engines you can hit speeds of 50 and go ballistic with 11 and 13 cc nitro. If gas is your thing the water cooled Zenoah makes this hull a blast to drive using a stock 231 or 260 with tuned pipe. Speeds of 50 mph plus are norm.

Saber 40

40" X 11.5" Deep Vee

Designed for the 7.5 to 11cc nitro engines and air or water cooled Zenoah

The Saber 40 is proven to be an outstanding race hull for the stock or air cooled classes with it's high windshield. This hull will run through a rooster tale or into strong winds without even a hiccup. It's very stable for speeds up to 53mph.

Lazer 45

45" X 12.25"

Designed for the stock or modified G260 Zenoah. Got a QD, put it in.

This is an all-out high performance race hull that is very stable and will make predictable corners in most water conditions. As for the sport boater, the Lazer 45 runs great with a stock G260 PUM Zenoah. It's easy to setup and is not hardware sensitive.

Razor 45

45”x12¼”

Designed for the stock or 

modified G260 Zenoah

The Razor 45 was originally designed for the Part Time Stock Class Racer / Part Time Sport Boater. It has a very high lift hull design with rear chine strakes added for extra stability. It was made to run with stock to mildly modified Zenoah Power for Boaters running at higher elevation and still achieve respectable speeds using a Canister Muffler or Tuned Pipe. It has also been tested using a very high-powered M&D Zenoah 260 with a Tuned Pipe with great results. The Razor 45 is still in the R&D Stages and it has proven to be a very fast hull design with Stock Zenoah Power and Tuned Pipes. We will post more as we learn more from our customers.

Rebel 45

45" X 14 3/4"
DESIGNED FOR HOMELITE AND
G23 ZENOAH ENGINES

The Rebel 45 is designed to get the absolute best speeds possible out of your water-cooled Homelite or stock to wildly modified Zenoah engines. The Rebel has lots of room for assembly and maintenance. The Rebel 45 with its sleek lines and outstanding performance will be a total hit at the lake. The Rebel 45 is about the most versatile boat you'll ever own.

Sport 45A

45" X 14.75"

inside measurement from the keel to deck is 8.5"

Designed for the air-cooled engine

The soul purpose of the is hull is to give the sport boater on a budget the opportunity to own an A/C hull using the less expensive air-cooled trimmer engines. The Sport 45A (air-cooled) is a surface drive hull that loves rough water. It has a ton of freeboard to conceal your engine for that scale appearance. With it's unique stepped transom this hull is fast and simple to setup using the Octura OC8STR-Q strudder assembly.

The hull comes in a high gloss gel-coat finish with the deck and hull pre-joined with the transom doublers installed.