AC Model Boats
P.O. BOX 23041, PLAZA 33
KELOWNA, B.C. CANADA
V1X 7K7
PH. 250-765-7730
FAX. 250-765-6888
Razor 45 | Wave Slave O/B | Comp 30 | Wave Slave | Magnum 21 | Magnum 45 | Magnum 67 | Wild Thing | Vision | Spector | Lazer 40 | Saber 40 | Lazer 45 | Rebel 45 | Sport 45A
This page now combines all the mono hulls into one page. The Nitro Mono and Gas Mono. Generally speaking, Gas Mono hulls are generally larger (in length and freeboard) steady fast hulls to handle the power and weight of gasoline two-stroke engines. Whereas the Nitro Mono hulls are not quite as large but will handle what they are designed for, the lighter weight of the nitro engines.
However, there are some mono hulls that run just as well with either type of engine, whether it's gas or glow, you will not be disappointed.
With the advancement of gas engines over the last several years, they too are gaining RPM and loosing the weight. The hull you choose is coming down to what type of boating you plan on doing. I do recommend if you elect to go mono that you allow me to suggest the mono hull for your boating needs. I only ask that you tell me what your plans are.
| Note: all pricing is in U.S. currency | ||||||||||||||||||
| Razor 45 |
45”x12¼” Designed for the stock or modified G260 Zenoah. |
The Razor 45 was originally designed for the Part Time Stock Class Racer / Part Time Sport Boater. It has a very high lift hull design with rear chine strakes added for extra stability. It was made to run with stock to mildly modified Zenoah Power for Boaters running at higher elevation and still achieve respectable speeds using a Canister Muffler or Tuned Pipe. It has also been tested using a very high-powered M&D Zenoah 260 with a Tuned Pipe with great results. The Razor 45 is still in the R&D Stages and it has proven to be a very fast hull design with Stock Zenoah Power and Tuned Pipes. We will post more as we learn more from our customers. |
|
|||||||||||||||
|
|
||||||||||||||||||
|
Wave Slave O/B |
37"
X 10"
|
If you are just getting into the hobby or just want a low maintenance model boat, the Wave Slave Outboard is for you. Unlike tunnel hulls where the water conditions have to be glass calm, the Wave Slave Outboard is right at home in rough to windy conditions so you can enjoy the hobby instead of waiting for calm water. |
|
|||||||||||||||
|
Comp 30 |
30"
X 7.5"
|
A wild and crazy little hot rod hull. Super fast even at high elevation and on super hot days using stock engines |
|
|||||||||||||||
|
Wave Slave |
37"
X 10"
|
This hull is a winner in every way. With its superb styling, excellent speed and handling, the Wave Slave is a great choice. If you are a sport boater, this hull runs great with anything from a 3.5 to a 7.5 inboard. |
|
|||||||||||||||
|
Magnum 30 |
30"
X 8.75"
|
Great style, performance and handling. The Magnum 21 is great for sport running and super fast on the race course. |
|
|||||||||||||||
|
Magnum 45 |
37.75" X
11.50"
|
An incredibly fast and stable hull using the 7.5 to 11cc nitro engines. |
|
|||||||||||||||
|
Magnum 67 |
43"
X 11.75"
|
An excellent running hull with any engine from an 11cc to a water cooled Zenoah. |
|
|||||||||||||||
|
Wild Thing |
43"
X 12.50"
|
This hull is based on the design of the Magnum 67 with added freeboard to accommodate the gas engines. It has excellent performance with awesome aerodynamics. |
|
|||||||||||||||
|
Vision |
50"
X 12.75"
|
Do you want to go fast? Using the 25cc or 30cc water cooled Homelite engine, this hull is an excellent choice |
|
|||||||||||||||
|
Spector |
50"
X 12.75"
|
The Spector is the same hull design as the Vision with additional freeboard to accept your air or water cooled Homelite. |
|
|||||||||||||||
NOTE: All pricing is in us currency. hulls can purchased directly from ac model boats by contacting Andy by phone at 250.765.7730, fax at 250.765.6888 or from a dealer nearest you. |
||||||||||||||||||
|
Lazer 40 |
40" X 11
1/2" Deep Vee
|
The Lazer 40 is a high performance hull that runs excellent in all water conditions. The Lazer can accommodate a multitude of engines and hardware combinations, and is easy to set up. With its sleek lines, outstanding performance and quality construction ,the Lazer 40 is a must for the all out racer. As for the sport boater the Lazer 40 is the one for you! Using lower priced stock K&B 7.5 Nitro engines you can hit speeds of 50 and go ballistic with 11 and 13 cc nitro. If gas is your thing the water cooled Zenoah makes this hull a blast to drive using a stock 231 or 260 with tuned pipe. Speeds of 50 mph plus are norm. |
|
|||||||||||||||
|
|
||||||||||||||||||
|
Saber 40 |
40" X 11.5" Deep Vee Designed for the 7.5 to 11cc nitro engines and air or water cooled Zenoah |
The Saber 40 is proven to be an outstanding race hull for the stock or air cooled classes with it's high windshield. This hull will run through a rooster tale or into strong winds without even a hiccup. It's very stable for speeds up to 53mph. |
|
|||||||||||||||
|
|
||||||||||||||||||
|
Lazer 45 |
45" X 12.25" Designed for the stock or modified G260 Zenoah. Got a QD, put it in. |
This is an all-out high performance race hull that is very stable and will make predictable corners in most water conditions. As for the sport boater, the Lazer 45 runs great with a stock G260 PUM Zenoah. It's easy to setup and is not hardware sensitive. |
|
|||||||||||||||
|
|
||||||||||||||||||
|
Rebel 45 |
45" X 14 3/4"
|
The Rebel 45 is designed to get the absolute best speeds possible out of your water-cooled Homelite or stock to wildly modified Zenoah engines. The Rebel has lots of room for assembly and maintenance. The Rebel 45 with its sleek lines and outstanding performance will be a total hit at the lake. The Rebel 45 is about the most versatile boat you'll ever own. |
|
|||||||||||||||
|
Sport 45A |
45" X 14.75" inside measurement from the keel to deck is 8.5" Designed for the air-cooled engine |
The soul purpose of the is hull is to give the sport boater on a budget the opportunity to own an A/C hull using the less expensive air-cooled trimmer engines. The Sport 45A (air-cooled) is a surface drive hull that loves rough water. It has a ton of freeboard to conceal your engine for that scale appearance. With it's unique stepped transom this hull is fast and simple to setup using the Octura OC8STR-Q strudder assembly. The hull comes in a high gloss gel-coat finish with the deck and hull pre-joined with the transom doublers installed. |
|
|||||||||||||||