CUSTOM MADE PRINTED CIRCUIT BOARDS

I have the ability to produce Good Quality Circuit Boards.

Currently I use 1/32 inch Glass Epoxy Blanks, with 2 oz copper.
Pricing is typically $0.75 per Square Inch, plus one Cent per hole
for drilling, Postage Extra. Quantity Pricing also available.

This 1/32 inch board is 1/2 the normal thickness, but double the normal
copper thickness. Easily Trimmed with scissors.
It is a high quality board, that is quite flexable and does Not break
easily when flexed. However due to its thickness, it is not really
suitable for edge connectors. Other than that, Its really good board.

I can Also do Double sided boards, But I "Cannot" do plate through holes.

I have just purchased some Double Sided Board, also 1/32 inch, but with
a thinner copper layer. My estimate is its about 0.7 ounce copper. Not a
problem for lower power circuits. Also Good Quality and easily trimmed
with scissors.

I will Computer Draft Boards if Required. Pricing on an individual basis.

You can contact me through my E-mail address on my Home Page, for more details.

I can either work with your "Schematic" or Possibly a "Gerber File" if you can create one.

Sorry, I am Not Interested in doing Large Quantity Orders.
Probably orders ranging between 1 to 10 boards is OK.

For Large Orders, I suggest you cantact a Professional PCB Manufactuer.