Sunday, December 31, 2006
Behind panel wiring, insulation.
Took a number of photos of the wiring behind the panel. These are primarily for future reference. There are 10 of them, only the first 3 shown here. I am having problems with my audio panel. The pins in the connector tend to push back when the panel is installed in the tray with the result that some pins do not make contact. I replaced the connectors when I was wiring the panel but I used the original pins. Now I'm wondering if there was a difference in the new connectors. I ordered new ones again, this time with pins. This is becoming a PITA. |  |
| Spent a good part of the day installing insulation on the firewall and sidewalls. Only part left is the firewall end of the tunnel. |  |
| I'm on the homestretch to getting the fuselage into the paint shop. |  |
