Tuesday, December 19, 2006
Temperature probes, blast tubes.
| Installed the EGT and CHT probes. I mounted the EGT probes 1 1/2" below the flange on each exhaust port. The #1 cylinder got the dual probe which connects to the Lasar mag controller. It's supposed to be the hot cylinder..so we'll see. |  |
 | |
| Also installed the blast tubes for mags and alternator. I ran some 1/8 " aluminum wire down the inside of each tube and fastened it to the baffling beside the tube intake. This lets me direct the blast tube by bending the wire. Worked well on the two previous RV's I built. |  |
 |
