Metal rain gutter scoop plans. Welcome to Shebang, your free information site.
Rain gutter scoop plans
Make up a cardboard template from the plan dimensions. Lay the template over a sheet of tin and trace with a marker pen. Cut along the lines. Fold up the sides to 90 degrees. wrap the first rear side across to meet the other side, bend the tab and fit to the inside. Bend second side and bend the tab to fit on the outside. Bend the back up and fold over the top and squeeze tight with pliers. Drill a hole on both sides, and pop rivet through the side and tab. Place handle on the rear of the metal scoop angling upward, secure with two metal screws.
To construct the handle, use a piece of wood 6-1/2 inches long, cut one end at 20 degrees.
Feel free to click the +1 button if you found this helpful.
