Specifications (engine, drive train, etc.)

Toyota Land Cruiser, Model FJ45LV


Engine Model F............................(125hp./3, 600 r.p.m. SAE) gasoline.
Type............................................6-cylinder in-line, 4-cycle, overhead-valve,
Bore x Stroke (mm).......................90 x 101.6 (3.54 x 4.00 in.)
Displacement (cc)........................ 3,878 (236.7 cu. in.)
Compression Ratio ...................... 7.7
Maximum Gross Power................ 135hp at 3,800RPM
Maximum Gross Torque............... 30 m.-kg. (217ft-lb.) at 2,000RPM (SAE)
Engine Dimensions (mm)............ 1,057.8 x 704.5 x 831 (Len. x Wid. x Height)
Engine Weight, net (kg).............. 282 kg
Firing Order ............................... 1-5-3-6-2-4
Starter Control ........................... Key turn switch
Distributer................................... Model F centrifugal governor and vacuum spark controler
Carburetor ................................. Down draft type
Air Cleaner ................................. Paper filter type (Option: Oil bath type)
Fuel Pump .................................. Diaphragm type
Oil Pump .................................... Gear type
Oil Filter .................................... Paper filter element type
Water Pump ............................... Centrifugal

Battery, rating ........................... 12V 50 amp-hr.
Alternator ................................... 12V, 360W (Option: 12V, 420W)
Generator Regulator ................... 1-element type
Starter, rating ............................. 12V, 1.4hp
Clutch .........................................Dry single plate with torsion rubbers.
Transmission ...............................3-speed, 2nd and 3rd gears synchromesh.
Transfer ......................................2-speed, helical gear sliding type.
Propeller Shaft ......Two tubular-type shafts w/four spider-type universal joints.
Rear Axle ..............Semi-floating, hypoid gear drive.
Front Axle ..............Full-floating, hypoid gear drive.
Steering Gear .........Worm and sector roller type.

Brake, service ........Hydraulic brake, operating all wheels.
Brake, parking ........Mechanical brake operating on propeller shaft.
Suspension, front ...Semi-elliptic leaf springs and double-acting hydraulic shock absorbers.
Suspension, rear.....Progressive type semi-elliptic leaf springs, torsion stabilizer and
double-action hydraulic shock absorbers.

Frame .......................Girder type, channel section.

Maximum Payload (kg.) .......................600 (1,320 lb) or 400 (880 lb)
Maximum Allowable Speed (km/hr) ................................120 (75 mph)
Gradeability............................................................................34 deg.
Minimum Turning Radius (m) ............................................6.2 (20.3 ft)
Maximum Braking Distance (m) (Initial Speed 50km./hr)..15
Fuel Tank Capacity (liters) ...............................................70 (18.5 US gal)

Tire Size, front .............................................................7.00 -15 6-ply rating
Tire Size, rear ..............................................................7.00 -15 8-ply rating