Finish Kit
Parking brake valve is mounted on back side of firewall & is controlled by a push/pull cable
This is how the canopy starts out.
Trimming the canopy with lots of heat in the shop (40C - 104F)
When I have more time I will make a detailed account of all mods to finish kit.
Canopy frame fitted
slider fitted onto frame
Windscreen position adjusted to allow front deck to be modified for access to header tank.
Beginning to fit side skirts with my lovely assistant inside
Windshield clips in place & ready for fiberglass fairing
This is how the oil cooler intake starts before it is carved.
Fiberglass in place & ready to be sanded
Oil cooler duct on bottom & intercooler duct on side
April 02, 2003
