|
Factory
Authorized training
and operation of "STING Mk II" |
"STING Mk II"™ |
Detailed Specifications
|
|
Acceleration measurement range |
0G to +10G | |
| Acceleration measurement resolution: | 0.0025G (12 bits) | |
| Load bearing strength measurement range: | 0 to 950 kPa | |
| Water depth measurement range: | 0m to 50m -or- 0m to 200m | |
| Water depth measurement resolution: | 0.012m -or- 0.05m (12 bits) | |
| Maximum operational depth: | 300m | |
| Maximum measurable depth of penetration: | 3m (with shaft extenders) | |
| Sampling rate: | 2 kHz | |
| Data acquisition triggering: | water immersion or preset depth (0m to 200m) | |
| Data collection autonomy (memory capacity): |
2 minutes (acceleration only)1 minute (acceleration plus depth) |
|
|
Download speed to computer: |
38.4 kilobaud |
|
| Download Time: | < 1 minute | |
| Shaft length: |
1 m standard, extendable to 3m with additional segments |
|
| Impact foot diameters: |
25mm, 35mm, 50mm (stainless steel), 70mm (aluminum) |
|
| Probe materials: |
304 stainless steel body, hard-anodized aluminum end cap, PVC tail cone |
|
| Tether (retrieval cord): | 4.8mm diameter braid, type SC-6 | |
| Mass: |
9.7kg with 1 m shaft length 3kg for each additional 1 m extension |
|
| Power: | Internal battery,rechargeable (adapter included) | |
| Software: |
Communications and Data Analysis. Runs under Windows 95, 98, ME, XP, and NT 4.0 |
|
|
Coastal Geoscience Research Corporation
|
||