HORIZONTAL STABILIZER

Cochrane, Alberta, Canada

Building A New Project Starting February 98

H-Stab ribs placed onto H-Stab spar

The lower left photo is my heating chamber made of 1/2' foam sheets, the sheets can be set up in numerous shapes to contain the heat. The heat source is a propane construction space heater. This method will be used to form around the lower fuselage later so I can post cure the complete lower fuselage at one time. Presently the Horizontal Stabilizer is in the box getting post cured.

Photos of my "Vision" aircraft construction will be posted from time to time

End Of Photo Log

Return to Tail Feathers Home Page