Knobs, Cabinetry, PCB Card Racks, Heat Sinks, and other Hardware

click image for larger picture

Salvage flexible wire harness hose, great for robotics! Includes metal end mounting flange and removeable guide clamp hardware. Measures 72 inches total length, hose diameter 1 1/2 inches.

$24.00 each

click image for larger picture

Assortment of antique radio knobs including some backing plates.

$10.00 set

click image for larger picture

Set of aluminum knobs, levers, and metal tabs.

$10.00 set

click image for larger picture

Salvage metal electronic project case, includes standard power cord socket, fuseholder, and wiring to power switch on front panel. Measures 5 3/4 X 10 1/2 X 16 inches.

$18.00

click image for larger picture

Salvage metal electronic project case, measures 5 X 6 X 22 inches.

$12.00

click image for larger picture

Salvage metal electronic case, includes front panel power switch, measures 2 X 12 X 12 inches.

$12.00

click image for larger picture

Salvage plastic case with metal end plates. Includes standard power cord socket, fuseholder, and power switch on rear panel. Measures 3 1/2 X 9 X 11 inches.

$18.00

click image for larger picture

A mixture of cooling fans pulled from equipment, most work fine, some don't.

10 for $3.00

click image for larger picture

Flexible bellows assembly, extends up to 6 inches, with 2 1/4 inch circle at one end, and a 4 3/4 inch square opening at the other. Outer size is 6 1/4 inches.

$24.00

click image for larger picture

Large salvage bellows unit, extends from 1/4 inch to over 18 inches. The small round hole is 5 1/4 inches in diameter while the large end has a 10 inch square opening.

$35.00 each

click image for larger picture

New stock 5/16-24 1/2 inch long hex set screws.

25 for $1.00

click image for larger picture

Salvage metal euro rack hardware assortment including slides, rails, and one small metal case.

$12.00

click image for larger picture

Huge assortment with many types of salvage circuit board edge connectors, some including metal mounting brackets.

All for $12.00

click image for larger picture

Over five pounds of good condition used pcb mounting slides of many different types including some mounted on rack plates.

All for $12.00

click image for larger picture

Used small edge connector motherboard with pcb guide plates. Has four 50 pin connectors and two 16 pin headers, 3 1/8 inch board width.

$12.00

click image for larger picture

Large salvage 19 inch rack mount card rack assembly including guides and wire wrap type edge connectors for 17 circuit boards. Board size is 4 inches by 6 1/2 inches or longer and the connectors are rectangular euro type 3 X 32 pins, with only the outer two rows filled for total 64 pins each.

$25.00 each

click image for larger picture

Here is a nice pcb card rack, fits 4 1/2 inch wide boards. Lightly used 56 pin edge connectors are included.

$10.00

click image for larger picture

Metal card rack, salvage, fits 8 5/8 inch wide boards. Includes captive mounting screws.

$6.00 each

click image for larger picture

Metal card rack, salvage, approximately 7 X 9 X 9 inches, with additional 1 inch mounting flanges.

$6.00

click image for larger picture

Salvage metal chassis levelling post and bracket with mounting hole for large castor asssembly as sold below.

$16.00 set of four

click image for larger picture

Large cabinet chassis castor wheel to fit above bracket.

$28.00 set of four

click image for larger picture

Used heavy duty dual wheel castor assembly to fit above bracket.

$24.00 set of four

click image for larger picture

Two sets of four large equipment levelling feet.

$16.00