Learn more about these features available on all AutoWindow models...
AutoWindow adds new functions to your car's remote entry system. All AutoWindow models have remote window control and can be configured from the remote. Some features are common to all models, and other models have unique features you can learn about on the Products page. Click on a feature to learn more.
AutoWindow reads factory remote UNLOCK and
LOCK button presses to make AutoWindow commands.
"Switchblade" and "keyshape"
remote styles both work with no modification.
Remote buttons continue to do their normal
job of un/locking doors and when AutoWindow
recognizes its special commands windows and
sunroof go into action. The final remote
button pressed is how door locks remain after
AutoWindow finishes doing its thing.
| Press on remote... |
Command |
AutoWindow does this... |
 
(3 unlocks) |
OPEN |
Unlocks all doors, opens all windows (sunroof stays still), and disarms
the car alarm. |
(unlock lock) |
CLOSE* |
Locks all doors, closes all windows and sunroof (if equipped), and arms
the car alarm. |
(unlock unlock lock) |
VENT* |
Available on Cool+ and Classic models only. Locks all doors, closes sunroof (if equipped), opens windows a crack, and arms the car alarm. |
*These commands have a self-imposed 15 second
time limit for use after closing the driver's
door, but this restriction can be relaxed
using SETUP options.
AutoWindow commands are sequential button
presses paced at a "natural" cadence.
Pausing too long (>1.5s) between buttons
or pressing buttons too rapidly (<0.5s)
discards the command attempt. |
| While any remote window command is running, press... |
(unlock ) |
STOP |
Aborts the command and immediately halts window/sunroof motion, unlocks
door/s**, and disarms the car. (** Number of doors depends on VAG tool
Selective Unlocking setting - see dealer.) |
| If CLOSE or VENT commands are running, press... |
(unlock unlock) |
RETRACT |
STOP, then reverses window travel (drops all windows down fully), unlocks all doors, disarms
car. |
WARNING: There is risk of injury operating electric windows. Please judge
your situation carefully (family, occupants, pets) and review AutoWindow
safety features. Use or restrict commands accordingly - see SETUP options.
All AutoWindow models have Smart Touch for less fumbling on remote buttons
and added convenience. A single button press (lock) commands windows/sunroof - works on all cars. Smart Touch is off by default and must be enabled with SETUP prior to use.
| Press on remote... |
Command |
AutoWindow does this... |
( )
(lock..) |
ONE-TOUCH UP |
Press LOCK within 15 seconds after shutting the driver's door (2001 and
earlier cars press and hold LOCK for 2 seconds) and ONE-TOUCH UP performs CLOSE. (Cool+ and Classic models can optionally perform VENT - see SETUP for
ONE-TOUCH UP command selection.) |
(lock) |
VENT-CLOSE |
(Available on Cool+ and Classic models only.) This command closes windows
when they are vented, car then stays locked and armed. |
AutoWindow is ready-to-use after installation and is always "on" with default settings. A Programming Lockout
will prevent factory settings from being changing unless it is removed.
If you enjoy using AutoWindow as shipped leave this lockout in place. To
change any option you must first remove the lockout to permit SETUP from the remote.
You can customize AutoWindow for different safety, convenience, and security needs using SETUP. "Soft switch" settings enable/disable AutoWindow actions. Change options whenever you like - they remain in effect until changed again. Replacing the Programming Lockout at any time will restore all settings to factory default values.
| Press on remote... |
Command |
AutoWindow does this... |
(lock...held 15 sec) |
SETUP |
Corner marking lights flash (alarm honks) confirming entry into configuration
mode, release the lock button. |
| Cool+ and Classic models: After the SETUP flash, the car alarm LED near driver's door lock darkens, and after a few moments begins to blink a pattern that displays AutoWindow settings. Pressing UNLOCK after viewing a setting will change its value. |
| TT/RS, Basic, and Reflex models: After the SETUP flash, you have five seconds to press UNLOCK for selecting
the next mode of operation in the list: Default, POWER Pack, MASTER Off. |
User guide with your package describes all available options for your model.
Some of the things you can customize are as follows: (Not all options shown here are available on all AutoWindow models).
- DOWN Control. Enable/disable window "down" actions: OPEN, VENT, RETRACT, and
Cool+ temperature controlled commands. Disabling DOWN means no matter what
AutoWindow cannot open windows. Stock methods for opening windows (key
lock twisting and interior window buttons) always work regardless of this
option setting.
- UP/CLOSE Control. Enable/disable window "up" and sunroof "close" actions
of the CLOSE, VENT, and Cool+ temperature controlled venting commands.
Disabling UP/CLOSE means AutoWindow cannot roll windows up. Stock methods
for closing windows/sunroof work as usual regardless this setting.
- Vent Control. Enable/disable just the VENT commands on the Classic and Cool+ models
without affecting any other AutoWindow commands on these models.
- Smart Touch ON/OFF. Enable/disable all the "one-button" Smart Touch commands: ONE-TOUCH
UP, VENT-CLOSE, THERMO-CLOSE and THERMO-STOP (if equipped). Disabling Smart
Touch does not affect the basic multi-button AutoWindow commands: OPEN,
VENT, CLOSE and THERMO-CYCLE (if equipped).
- ONE-TOUCH UP Command Selection. For Classic and Cool+ models only, sets the function of ONE-TOUCH UP
as either CLOSE (default) or VENT. (If neither action is desired you can turn Smart Touch off entirely, see above.)
- Remove 15 second time restriction. Extends CLOSE, VENT, and THERMO-CYCLE commands (as equipped) to be issued
past the time period expiring 15 seconds after shutting the driver's door.
- VENT gap Increase. For Classic and Cool+ only. Set all VENT commands to open windows a little
bit wider than the default amount to let more air flow.
- VENT gap Decrease. For Classic and Cool+ only. VENT commands open windows a bit less than
the default amount. In total, three different vent gap sizes are available
to choose from.
- MASTER On/Off. Enable/disable all AutoWindow functions. Return the car's remote entry system back to stock
- recommended for servicing, valet parking, and loaning your car to unfamiliar
drivers.
- Temperature regulation modes. (Cool+ model only.) Enable/disable THERMO-CYCLE or THERMO-CLOSE mode.
Factory pre-programmed settings available upon request, no charge. Your choice of settings may be specified at time of order and will become
active immediately after removing the Programming Lockout. Of course your
unit retains the ability to change any setting at any time thereafter.
AutoWindow is designed with safety in mind for operating in combination
with your care and attention. Learn how AutoWindow operates and know what
safety features are offered so you can use them when required. Experiment
with commands and be prepared to react in all situations. Read your car
manual and its safety notices and warnings about the hazards of power controlled
equipment on the vehicle for occupant safety. Select AutoWindow options
to suit your particular safety needs - take into consideration children
playing in the vicinity of the car, nearby pets, unfamiliar drivers, and
service technicians.
- Very stringent safety related options are pre-selected as the factory default
settings, and these settings cannot be changed accidentally. A Programming
Lockout on the module must be physically switched to allow changing any
setting from factory default.
- AutoWindow can only work while the car is parked, ignition is off, and
key has been removed from the ignition after running the car. There is
no possibility of accidental, distracting, or conflicting use of features
while the car is running - AutoWindow functions will be suspended.
- A master control option can be used from the remote to shut down all AutoWindow features. This quickly prohibits all AutoWindow features and effectively "disconnects" AutoWindow
from the car - without having to access the module or change its wiring.
AutoWindow can later be re-enabled using the same technique of switching
the master control back on.
- AutoWindow command patterns are a consistent extension of everyday use
of remote. Operations that close windows/sunroof always end with LOCK press,
and leave the car locked; operations to open windows always end with an
UNLOCK press, and leave the car unlocked, and so on. This helps to memorize
commands and understand their effects and reduces the chance of accidentally
using the "wrong" command.
- A STOP command (press UNLOCK) received while AutoWindow is operating windows immediately halts the action. STOP feature cannot be disabled or changed by the user no matter what combination options are selected. Furthermore, after using STOP to halt closing windows, pressing UNLOCK again within 2 seconds will cause all windows to RETRACT (roll down fully). After using STOP or RETRACT door/s
are unlocked to allow entry into the vehicle.
- By default, commands capable of closing windows/sunroof are time restricted to work only if used within 15 seconds after shutting the driver's door.
This restriction helps ensure it is the driver of the vehicle using the
command shortly after parking, and is nearby to observe window closure
and knows how to react to emergencies.
- AutoWindow allows even more restrictive safety settings to be programmed
by the user - to prohibit all window/sunroof closure using remote commands
- no matter what features or commands are attempted, or to shut down all
AutoWindow function completely.
- AutoWindow is designed to be compatible with stock vehicle operation and
offers nonconflicting features and won't interfere with the safety of normal
locking controls, remote keyless entry, interior power door lock buttons,
key locks (including window rollup/rolldown using the key in the door),
interior door lock knobs, rear child safety locks, stock window and sunroof
controls, power window buttons, driver's express up/down feature, child
lock-out switch, interior anti-pinch protection, and sunroof on your vehicle.
AutoWindow has been carefully designed to provide a secure operating environment:
- AutoWindow commands and SETUP work from stock remote control/s that are coded to match your car.
- AutoWindow uses the car's built-in security features for wireless communication
and does not interfere or diminish the security of this system.
- SETUP allows selective and complete restriction of window opening actions
to prevent any accidental opening from the remote.
- Designed for stock vehicle compatibility - nonconflicting use of lock controls,
remote keyless entry, interior power door lock buttons, key lock mechanisms
(including window rollup/rolldown), interior door lock knobs, rear child
safety locks.
- Compatible with and functionally integrated to stock vehicle alarm. The
alarm gets armed after using the following window commands: CLOSE, VENT,
VENT-CLOSE, THERMO-CYCLE, THERMO-CLOSE and THERMO-STOP.
- Temperature controlled window regulation suspends action and blocks window movement if the car alarm gets deactivated while
you are away from the car.
- VENT gap size is adjustable to limit the size of objects that may enter
the car while vented.
- Retains remote window capabilities for customized cars having "blanked"
exterior locks (cylinders removed), or even completely "skinned"
door handles. Contact support@autowindow.com for any unique or car customization
needs.
Package ships with printed Installation manual step-by-step instructions and diagrams intended for people having
little or no experience with car installations. Web picture galleries show
how. No electrical tools are required. The job is finished in 2 to 4 hours
(depends on model) using common tools: screwdrivers, pliers, and tape.
No permanent car modifications or dealer visit is required - simply add AutoWindow and start using it!
- AutoWindow module is about 2" square and installs inside the driver's door - remaining out of sight. AutoWindow works the same
for Left Hand Drive (LHD) or Right Hand Drive (RHD) cars. See Beetle door panel removal or Golf/Jetta/Bora/Passat, detailed in the guide for module installation.
- Reflex module is slightly larger, and requires removal of both front door
panels to gain access to folding mirror connectors. A cable is supplied
to connect passenger side controls to the module.
- 3M Scotchlok wiretaps designed for automotive use are included. Uses regular pliers for crimping
to car wires - no cutting or splicing or soldering.
- AutoWindow has a status LED that indicates installation progress and is useful for diagnostics. Following
the Installation Wizard as each wire gets attached to the car in order tells you if a good connection was made to the correct car wire. This
removes guesswork and makes electrical installation easy - even for beginners!
- Cool+ model has a temperature sensor internal to the unit, requiring no extra
installation.
- Brite model includes a relay kit that installs at the fuse panel to control
power to headlights when the car is off.
- TT/RS model includes wires and connectors that taps a Turbo Timer wire, and/or
a Remote Starter wire.
- Nite Sense option includes a 3mm (1/8") optical sensor for detecting daylight,
to be mounted discretely on the driver's door.
- Rain Sense option includes a 1.5" square sensor to stick on the windshield for
detecting rain, and comes with cable for attaching the sensor to the AutoWindow
module. An economical rain sensor lens re-mount kit is available from AutoWindow
if your windshield needs to be replaced. See photos of Rain Sense install at this link.
- A Programming Lockout prevents factory default settings from changing unless you want. The lockout
jumper may be removed after installation to enable SETUP for making option
changes.
Questions? Check the helpful FAQ for answers, or e-mail for technical support.
